| |
|
|
Front USB-1394 Ports:
|
- Molded one-piece module including 2 USB 2.0 Ports and 2 Firewire 1394 Ports.
- 16Ħħ long, high quality shielded cable connect between each port and plug is providing low noise and fast data transfer rate.
- This device can be mounted on the front or back of chassis for easy access and is an optional part for all Half-1U series case. It is the same model as VIA's P/N: 99-42-020043 that comes with EPIA-M version motherboard.
|
|
|
 |
Y Cable: |
- Y Cable is used to extend more power connecters from power supply to internal devices.
- One male connecter for accepting DC power, two female connecters can plug directly to drive devices.
- Y Cable comes with the length of 5Ħħ, 8Ħħ, 12Ħħ or longer.
- Depending on the system's configuration, you may need 1 or 2 Y Cables in all series of chassis that are using 12 volts DC-DC internal power supply.
|
|
|
|
Angle Y Cable: |
- Angle Y Cable is used to fit into the case that has limit space and extend more power connecters from power supply to internal devices.
- The difference from a standard Y Cable is the DC wire turns 90 degrees from two female connecters. It will save about 1Ħħ space when plug into drive devices.
- Angle Y Cable come with the length 5Ħħ, 8Ħħ, 12Ħħ or longer.
- All Half-2U cases are equipped with one 5Ħħ Angle Y Cable for power connection of IDE Compact Flash Card Reader (CF2-800).
|
|
|
|
40mm Case Fan: |
 |
| Size: |
40X40X20 mm |
Rating Voltage: |
12 Volts |
| Power Current: |
0.03 Amps |
Power Consumption: |
0.4 Watts |
| Speed: |
4200 RPM |
Air Flow: |
5.8 CFM |
| Noise: |
16.0 dBA |
Weight: |
3.0g |
| This 40mm brushless Fan is default for all Half-1U Chassis,ITS model 1908 and 1912. |
|
|
|
40mm High Speed Fan: |
|
| Size: |
40X40X20mm |
Rating Voltage: |
12 Volts |
| Power Current: |
0.12 Amps |
Power Consumption: |
1.4 Watts |
| Speed: |
8200 RPM |
Air Flow: |
10.8 CFM |
| Noise: |
27.5 dBA |
Weight: |
3.2g |
| This 40mm Dual Ball Bearing Fan is an optional fan for all ITS series Chassis. |
|
|
| |
60mm Cooling Fan |
 |
| Size: |
60X60X10 mm |
Rating Voltage: |
Voltage: 12 Volts |
| Power Current: |
0.03 Amps |
Power Consumption: |
0.4 Watts |
| Speed: |
4200 RPM |
Air Flow: |
6.5 CFM |
| Noise: |
15.0 dBA |
Weight: |
3.0g |
| This 60mm brushless Fan is the default internal case fan for all Half-2U Chassis |
|
|
 |
Com Port |
- DB-9 Standard 9 pin Serial Port
- Cable length: 15.7Ħħ (400mm)
- Optional front mounts COM port for all Half-1U Chassis.
- Optional rear mounts COM port for VIA SP series motherboard (back IO shield with 1 extra com port opening).
|
|
| |
Adapter Plate |
|
- 160X57X1mm aluminum plate
- 4X4mm hight direct mount stands with screws
- Convert VPower VP-85A or VP-115A 4 holes DC board to 2 holes Morex mounting standard.
- This plate is special designed to mount VP series board on most mini ITX chassis that are using Morex DC board.
|
|
|
| |
Mounting Ear for |
 |
- L Shape Mounting Ear for Rackmount 1U or Half-1U Case
; 2 pcs/set L shape 2mm metal plate .
|
|
| |
Aluminum Handle |
 |
- Aluminum Handle for Rackmount 1U or Half-1U Case; U shape 5mm diameter round aluminum, 2 pcs/set .
|
|
| |
Rackmount Half-1U |
 |
- A set of three 2.5mm iron sheet metal plate (left, center, right) for rackmounting 2 Half-1U units into a 1U rack space. This is a cost down version of Rackmount Front Panel and has the same functionality as model BR-1901.
|
| |
|
